KCB/2CY Series Gear Pump

Flow Rate Range: 1.1- 8m³/h
Suction Head: 5-3m
Operation Temperature: -10℃ - 150℃
Seal: Mechanical seal

1. Driving Gear Passive Gear
The active/passive gear after high temperature quenching, ion carburizing lime chloride. Gear has a stronger hardness, wear resistance, high temperature resistance, etc. Can extend the service life of the gear.

2. High Temperature Bearing
High temperature bearings can bear larger load torque, under high temperature, good stability, high bearing capacity, withstand high temperatures. Wear small, long life. Gear KCB18.3-KCB83.3 is the sliding bearing, KCB200 above is the rolling bearing.

3. Mechanical Seal
Carbide mechanical seal, with good heat resistance and impact resistance, friction coefficient is small, self lubricating performance, reliable performance, no leakage, high temperature resistance, wear resistance, corrosion resistance.

4. Integral Coupling
High temperature gear pump uses the integral coupling, safe and reliable, the concentricity is good, the service life is long, under the heavy load operation bears the torque ability to be strong.

5.100% Copper Motor
Gear pump matching 100% copper motor, stable operation, low calorific value, output power standards, long service life.

6. Certificate of Inspection
Out of the factory every gear pump has been strictly tested, and equipped with a certificate, manual, test data report, the ship with the Chinese classification society CCS certificate.